CoPA 750g
PolyMide™ is a family of Nylon/polyamide based filaments. Produced with Polymaker’s Warp-Free™ technology, PolyMide™ filaments deliver engineering properties intrinsic to Nylon and ease of printing. PolyMide™ CoPA is based on a copolymer of Nylon 6 and Nylon 6,6. The filament combines excellent strength, toughness, and heat resistance of up to 180˚C.
We recommend that this material be used with the Ultimaker Material Manager or PolyBox™ to keep it at dry conditions (relative humidity of 15% or less) at all times to maintain the best printing results.
Information
Warp-Free™ - Warp-Free™ technology enables the production of Nylon-based filaments that can be 3D printed with excellent dimensional stability and near-zero warpage. This is achieved by the fine control of microstructure and crystallization behaviour of Nylon, which enables the material to fully release the internal stress before solidification. The WarpFree™ technology in PolyMide™ CoPA is designed to work best with minimal bed temperatures.
Excellent Toughness - The outstanding mechanical strength and toughness makes PolyMide™ CoPA an excellent choice for engineering based applications.
Excellent Heat Resistance - With a high softening temperature of up to 180 °C, PolyMide™ CoPA is one of the most heat resistant 3D printing materials on the market.
Improved Printability – Unlike many other Nylon filaments, PolyMide™ CoPA is extremely easy to work with, exhibiting excellent dimensional stability when compared to other nylon filaments. It is compatible with most filament-based 3D printers with no heated bed or chamber required!
Wear Resistant - Parts printed in PolyMide™ CoPA display excellent wear resistance.
Uncompromised Quality - Polymakers leading quality control process and rigorous in-house testing ensure reliable printing and consistency across spools and batches.
The typical values presented in Polymakers data sheet are intended for reference and comparison purposes only. Due to the nature of 3D printing they should not be used for design specifications or quality control purposes
Print Settings Mechanical Properites Thermal Properties Notes Nozzle Temperature: 250˚C – 270˚C Printing Speed: 30mm/s – 50mm/s Bed Temperature: 25˚C – 50˚C Bed Surface: Glass with glue Cooling Fan: OFF Note: Based on 0.4 mm nozzle and Simplify 3D v.3.1. Printing conditions may vary with different printers and nozzle diameters Young’s Modulus: 2223 ± 199 Mpa Tensile Strength: 66.2 ± 0.9 Mpa Bending Strength: 97.0 ± 1.1 Mpa Impact Strength: 9.6 ± 1.4 kJ/m2 Glass Transition Temperature: 67˚C Vicat Softening Temperature: 180˚C Melting Temperature: 190˚C Drying Settings: 80˚C for 12h Recommended Support Materials: PolyDissolve™ S1 Other: It is highly recommended to use the Ultimaker Material Manager or PolyBox™ when printing with PolyMide™ CoPA and to store it in the resealable bag. To ensure a good heat resistance of your printed part it is recommended to anneal your PolyMide™ CoPA 3d printed model. Annealing settings: 70˚C for 2h Different annealing settings may be better for some geometries. Technical Data Sheets: Contact us Safety Data Sheets: Contact us