PolyDissolve S1

Complex Geometry - PolyDissolve™ S1 is a preferable solution when printing complex geometries, overhangs, internal cavities and complicated structures. It liberates you from support removal problems, and enables greater design freedom.

Wide Material Compatibility- PolyDissolve™ S1 is engineered to have a good adhesion and perfect interface with a variety of supported materials from Polymaker including Nylon, PLA, TPU and PVB.

Water Soluble - Optimized to dissolve in water, supports printed in PolyDissolve™ S1 will dissolve in tap water. Safe and easily accessible!

Improved surface quality - Greatly improve the surface quality where supports interface with your prints when using PolyDissolve™ S1.

Quality Control - Polymakers leading quality control process and rigorous in-house testing, ensure reliable printing and consistency across spools and batches.

 

Print Settings	Material Compatibility	Notes
Nozzle Temperature: 215˚C – 225˚C Printing Speed: 20mm/s – 40mm/s Bed Temperature: 25˚C – 60˚C Bed Surface: Glass with glue, blue tape Cooling Fan: ON Note: Based on 0.4 mm nozzle and Simplify 3D v.3.1. Printing conditions may vary with different printers and nozzle diameters	PLA based material from Polymaker’s portfolio + + PETG based material from Polymaker’s portfolio + ABS based material from Polymaker’s portfolio – – PC based material from Polymaker’s portfolio – – PVB based material from Polymaker’s portfolio + + TPU based material from Polymaker’s portfolio + + Nylon based material from Polymaker’s portfolio + + _________________ + + support the model very well + generally support the model depending on its geometry – generally doesn’t support the model depending on its geometry – – do not support the model	Drying Settings: 80˚C for 12h Other: It is highly recommended to use the PolyBox™ when printing with PolyDissolve™ S1 and to store it in the resealable bag. Technical Data Sheets: Contact us Safety Data Sheets: Contact us