top of page
PolyLite PC

PolyLite PC

PolyLite™ is a family of 3D printing filaments made with the best raw materials to deliver exceptional quality and reliability. PolyLite™ covers the most popular 3D printing materials to meet your everyday needs in design and prototyping. PolyLite™ PC is produced using a polycarbonate resin specifically engineered for 3D printing. It delivers good stiffness and heat resistance with light diffusing properties.

  • Information

    Heat Resistant - PolyLite™ PC is an excellent choice for heat resistant applications, offering better heat resistance than a range of other material types and withstanding temperatures well above 110 ºC.

    Stiff and Strong - PolyLite™ PC displays excellent tensile strength and stiffness, ideal for a wide range of engineering applications including custom 3D printed jigs, fixtures, brackets and manufacturing aids.

    Good Light Diffusion - PolyLite™ PC prints transparent parts with an attractive crystal shine and good light diffusion!

    Wider Printer Compatibility - PolyLite™ PC has been engineered specifically for 3d printing with compatibility and usability in mind. With a lower extrusion temperature (250 - 270˚C), PolyLite™ PC is an accessible polycarbonate filament that can be printed on a wider range of 3D printers. 90°C heated bed required.

    Uncompromised Quality - With Polymaker's industry leading quality control process and rigorous in-house testing, you can rest assured that PolyLite™ PC will produce beautiful, reliable and accurate printed parts.

    Print Settings Mechanical Properties Thermal Properties Notes
    Nozzle Temperature: 250˚C – 270˚C Printing Speed: 30mm/s – 50mm/s Bed Temperature: 90˚C – 105˚C Bed Surface: BuildTak® Cooling Fan: OFF Note: Based on 0.4 mm nozzle and Simplify 3D v.3.1. Printing conditions may vary with different printers and nozzle diameters Young’s Modulus: 2636 ± 330 Mpa Tensile Strength: 46.6 ± 0.9 Mpa Bending Strength: 85.1 ± 2.9 Mpa Impact Strength: Glass Transition Temperature: 113˚C Vicat Softening Temperature: 119˚C Melting Temperature: N/A Recommended Support Materials: PolyDissolve™ S2 Other: When printing with PolyLite™ PC it is recommended to use an enclosure and for large parts it is recommended to use a heated chamber. It is recommended to anneal the printed part right after the printing process to release the residual internal stress. Annealing settings: 100˚C for 2h Technical Data Sheets: Contact us Safety Data Sheets: Contact us

    The typical values presented in Polymakers data sheet are intended for reference and comparison purposes only. Due to the nature of 3D printing they should not be used for design specifications or quality control purposes.

bottom of page